Samsung Galaxy Mega 5.8 GT-I9152 flash file download

Samsung Galaxy Mega 5.8 GT-I9152 flash file download

I9152XXUANA1: Android 4.2.2 XXUANA1 Firmware for Galaxy Mega 5.8 GT-I9152- Installation Guide

 

Download and install the XXUANA1 (I9152XXUANA1) Android 4.2.2 Jelly Bean official firmware update on Samsung Galaxy Mega 5.8 GT-I9152. The firmware update out for several countries and the users can manually download I9152XXUANA1 to update their device. The users can also update their device to this new firmware through Samsung Kies or OTA (Over the Air). It is always recommended to update Your device with the latest firmware whenever Samsung rolled out as with every update Samsung introduces fixes for bugs (if any), improve/enhance overall performance in OS and sometime introduces new features. Here at AndroidOfficer, you’ll find both official and manual way to update this latest firmware on your Samsung GT-I9152. Scroll through this page to learn how to install stock I9152XXUANA1 Android 4.2.2 Jelly Bean firmware on Galaxy Mega 5.8 GT-I9152. However, flashing or installing official firmware restore device kernel, so root access to your device will be void, means the firmware update will unroot your device (if it was rooted).
There are two official ways to update the I9152XXUANA1 Android 4.2.2 Jelly Bean stock firmware, OTA and KIES. However, if you unable to update your device through OTA and Kies, then you can flash stock firmware manually through Odin. AndroidOfficer always recommend you to try official ways (OTA or KIES) first and if official method don’t work then try manual method to flash the stock firmware.

I9152XXUANA1 Android 4.2.2 Firmware Details:

Device: Samsung Galaxy Mega 5.8
Model: GT-I9152
Version: Android 4.2.2
PDA: I9152XXUANA1

Warning!

The firmware is released only for the Samsung Galaxy Mega 5.8 GT-I9152. So, don’t try this tutorial on any other Android device and also the tutorial is based on Windows PC. AndroidOfficer is not responsible If anything wrong happens to your device after following this guide, try this at your own risk. However, we believe that if you follow the instructions carefully that mentioned in this guide, your device shouldn’t face any issue.

Pre Requisites:

Before proceeding to update guide, AndroidOfficer recommend to backup all your device data and settings to restore later when you need that. However, official firmware restore all previous data but if your device get stuck at bootloop issue or fall into any error, the backup file will help you to restore all your data.

1. Check your device battery percentage, make sure that your device have at least 60% battery power (How to Check Battery Percentage on Android Devices)
2. Backup all your device data and settings to external storage- (How to Backup Android Data and Settings)
3. Check that USB Debugging is Enabled on your device, otherwise it is not possible to connect and transfer files between PC and Galaxy Mega 5.8 GT-I9152 via USB- (How to Enable/Disable USB Debugging on Android Devices)
4. Install USB Driver for Galaxy Mega 5.8 GT-I9152 on your PC (Download USB Driver) 

Note That:

• If your Galaxy Mega 5.8 GT-I9152 have any Custom ROM installed such as- CyanogenMod ROM, ParanoidAndroid ROM, AOKP ROM, SLIM ROM, PACman ROM, Avatar ROM, Omni ROM, LiquidSmooth ROM, Beanstalk ROM, Carbon ROM etc, then it’ll be replaced by stock firmware.
• Custom Recovery such as ClockWorkMod Recovery (CWM) or TWRP or Philz Recovery will be replaced by Stock Recovery.

How to Install/Update Official Firmware on Galaxy Mega 5.8 GT-I9152 via OTA (Over the Air):

1. Turn on Internet connection on your device (should have stable Internet connection)
2. Go to Settings>>About, and tap on the Update Option from there (If its show “The latest update have already been installed” message, then your device haven’t receive any OTA yet, check back later or try installing through Kies.)
3. Tap OK to start the download and installation process
4. Once done, your device will reboot automatically

How to Install/Update Official Firmware on Galaxy Mega 5.8 GT-I9152 via Samsung Kies:

1. Turn on Internet connection on your device (should have stable Internet connection)
2. Download and Install Samsung Kies Utility on your PC
3. Connect your device to PC through USB
4. Open/Run Samsung Kies, it should automatically detect your device
5. At the Samsung Kies home screen, you’ll see New Firmware Upgrade is available notification (If it show- “This is the last firmware”, then your device haven’t received the latest firmware on Kies, check back later or try flashing manually through Odin)
6. Click on the Firmware Upgrade button to start the update process
7. Follow onscreen instructions
8. Once done, your device will be reboot automatically
9. After reboot, you can disconnect your device from PC 

If both the above official way don’t work for you, then download firmware from the below list and follow the manual installation guide as it is.

Download I9152XXUANA1 Android 4.2.2 Jelly Bean Firmware

Note that: you can flash/install any firmware from the below list if the firmware for your country is not available, except those firmware comes with their carrier name.
Nepal: I9152XXUANA1_I9152ODDAMI2_NPL
India: I9152XXUANA1_I9152ODDAMI2_INU
Sri Lanka: I9152XXUANA1_I9152ODDAMI2_SLK
Kazakhstan: I9152XXUANA1_I9152OXEANA1_SKZ
Uzbekistan: I9152XXUANA1_I9152OXEANA1_CAC
Russia: I9152XXUANA1_I9152OXEANA1_SER
Ukraine (Kyivstar): I9152XXUANA1_I9152OXEANA1_SEK
[P.S- The list will be updated with rest of the countries/carrier when respective firmware will release]

How to Install/Update Official Firmware on Galaxy Mega 5.8 GT-I9152 Manually through Odin:

1. Download firmware from the above list and extract the zip file, you should get .tar.md5 file along with few other files.
2. Download Odin v3.09 and extract the zip file, you should get Odin v3.09.exe file along with other files.
3. Now Open/Run Odin v3.09.exe file as an administrator (to open program with admin privilege, right click on the Odin v3.09.exe file and click on the “Run as administrator” from the context menu, this is applicable only on Windows Vista, Windows 7 or higher PC)
4. Switch off and boot Galaxy Mega 5.8 I9152 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear). A warning message will flash, now press Volume Up key to proceed to Download Mode.
5. Now connect your Galaxy Mega 5.8 I9152 to your PC via USB cable
6. In Odin screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been successfully detected by Odin. (If not, then try connecting through another USB port. If you are using desktop PC, use USB port located at the back of the CPU. If still don’t work, then you should reinstall the USB driver and try again)
7. Make sure that, only the “Auto Reboot” and “F. Reset Time”options are checked in Odin screen.
8. Now, click on the AP button and select the .tar.md5 file that you get by extracting the firmware zip file in step 1.
9. Now, click on the Start button to begin the installation process, and wait few moments.
10. Once completed, you would see “PASS!” message in ID:COM port having green background
11. Your phone should automatically reboot after completion
12. You can now disconnect/unplug your phone from computer

Congrats! your Galaxy Mega 5.8 GT-I9152 now updated to the I9152XXUANA1 Android 4.2.2 Jelly Bean stock firmware. Now, go to Settings>>About, and verify the firmware update.

How to Fix Bootloop on Galaxy Mega 5.8 GT-I9152

If anything goes wrong, your device may stuck at booting animation. If your Galaxy Mega 5.8 GT-I9152 stuck at boot animation screen for more than 10 minutes, then follow these instructions:

• Go to Recovery Mode by pressing and holding the Volume Up+Home+Power buttons together.
• Now, perform Wipe Data/Factory Reset and Wipe Cache Partition task before selecting the reboot system now option. In Recovery Mode use the Volume keys to navigate between options and Power key to select any option.

Note that: Wipe task process will erase all your device internal memory data but not the external SD card data.